Think about a scissor lift table, you need to consider these 5 items to avoid operator injuries and expensive down time. I have been selling lift tables for a long time and these 5 key points are the things i would consider a must know for any engineer or purchasing agent.
1 . Who also Makes The Lift Table
It amazes me as to the sheer number of raise tables that are available on the market! What amazes me even more is that the quality of some of these lifts are so poor. A growing number of of these lifts are coming from China and taiwan and are designed not for performance, but for price points.
Action — Ask the lift manufacturer, or even distributor, where the lift is built. When it is not built here in the claims, then chances are you will end up with essential oil leaks, bad motors, weak weldings, and inferior components! Remember, pay out now or pay later.
2 . Know Your Duty Cycle
If your application calls for a lift table that will cycle more than 20 times an hour or so then you will likely need a high responsibility cycle lift table. Standard elevates are only designed to cycle a few times one hour. Anything more than that can prematurely wear the particular lift table out.
Action – Let the manufacturer know how many process the lift will endure inside a hour, day, year time frame. In case you inform them that the lift will period 60 times an hour and they still suggest a standard duty cycle lift table, then talk to another producer.
3. Center the Load
A lift table with an offset load is unsafe and also prematurely wears out the lift tables scissor joints along with other components. Any load that is over 30% offset from the lifts middle should be a concern. Keep in mind this is a common rule. For very heavy bodyweight capacities and for high duty cycle lifts, 30% can even be too much.
Actions – Make it a point to properly center force onto the lifter. If that is not possible, talk through your loading sequence with the manufacturer. They can make suggestions or worst case, red flag the application.
4. Safety First
Any lift table that will be used with human providers nearby, should be equipped with the proper security components.
Action – Safety skirts should be purchased to protect scissor pinch points.
If you loved this short article and you would certainly such as to get even more details relating to Hubtischwagen kindly go to our own web site.
If the lift is pit mounted, then it should be equipped with angled toe guards to prevent shear factors. A power lockout device should also be applied to maintenance the lift. These are often times call LOTO valves. I also recommend that all tables be anchored to the floor when possible.
Lift tables are primarily used to improve ergonomics, so you have to give special consideration to how the operator will load and sell the material.
Action – Preferably you want the material to around 30″ to 42″ from the ground. This can keep it around the elbow height of 95% of the operators. If the material is flat sheets then a lift only can be used. If the material is in small boxes, then you should consider a good start and rotate. The rotate will prevent the operator from reaching over the pallet. If the material is in the bin and it is loaded with small pieces, then a lift and tilt should be thought about. The tilting function will place the material closest the operator as it will slide to one side of the bin.
These are just a few of the items you need to consider when purchasing lift desks, and you should always consult with an expert when possible. The more information you can provide the manufacturer about your application, the more likely you are to end up with a quality table that your boss will be impressed with.